IP-DECT Server 200

Protocol Support
• Session Initiated Protocol (SIP)
– Broadcast Messaging
– Message Service Functions (MSF)
– XML-RPC
– OAM-REST-API

SIP VoIP Support
• Basic call
• Caller ID
• Call Hold
• Call Transfer
• Call Waiting
• Music on Hold (MOH)
Note: Additional voice calling features dependent on host SIP-PBX (Call control platform)

Operation And Maintenance
• Web GUI for administration and maintenance of the entire infrastructure
• HTTP with digest authentication
• HTTPS
• Syslog
• SNMP v2

System Architecture
• The Spectralink IP-DECT Server 200 is both a radio unit (RFP) and a SIP integration unit to the host SIP Call Control / UC platform.
• Single-cell configuration ONLY:
– 1 x Spectralink IP-DECT Server 200 and
• Up to 3 x Spectralink DECT Repeaters
– 12 wireless users / 6 simultaneous calls (codec independent)

Supported Codecs
• G.711 A-law and U-law
• G.726 (32 kbps – 4 bit ADPCM)
• G.729

Network
• 10/100 Mbps Ethernet port
• Manual or dynamic host configuration protocol (DHCP)
• Time and date synchronization using Network Time Protocol (NTP)
• LED status indication

Provisioning
• Configuration
• User data
• Server firmware
• Handset firmware

Enhanced Provisioning
• The unit can be programmed to download its own configuration and user settings as well as handset firmware and then update the handset firmware based on a programmed
schedule (e.g. upgrade at 03:00).
Note: Scheduled firmware update to all the handsets is accomplished via SUOTA, providing totally automated firmware roll-out support to update IP-DECT Server 200 and all connected handset.

Radio Interface
• Average transmit power: typical 5mW/ch (US) or 10mW/ch. (EU)
• Peak transmit power: typical 125mW (US) or 250mW (EU)
• RF output 20 to 24 dBm at antenna connection
• Sensitivity: typical -90 dBm measured at antenna connection at BER = 0.001
• Typical range:
– Indoor: Up to 50m distance (150 feet)
– Open areas: Up to 300m distance (1,000 feet)
• Possible to connect external antenna
(Only approved Spectralink external antenna can be used)

Application Protocols
• XML-RPC API supporting:
– Broadcast Messaging
– Message Service Functions (MSF)

Approvals (Regulatory Standards)
• Radio Equipment Directive 2014/53/EU
• Low Voltage Directive 2014/35/EU (CE)
• FCC 47 CFR Part 15
Safety (Regulatory Standards)
• UL62368-1 CAN/CSA-C22.2 No. 62368-1
• IEC 62368-1
• AS/NZS 62368-1
• EN 62368-1
Please check our support site for the latest approvals and regulatory compliance.

Environmental Conditions
• Operating temperature: 10º – 40º C (50º – 104º F)
• Storage temperature: -50º – 70º C (-58º – 158º F)
• Relative humidity: between 20% and 80% (noncondensing)
• The equipment is in compliance with the requirements of EU directive 2011/65/EU (RoHS) and 2012/19/EU (WEEE)

Electrical Requirements
• Power over Ethernet (IEEE 802.3af), mode A & B
• PoE Class 1 device
• Typical power consumption: 3W per unit
• External power outlet (power supply must be ordered separately)

Physical Characteristics
• Size: 100 x 100 x 43 mm (3.94 x 3.94 x 1.69 in.)
• Weight: 120 gr. (4.2 oz)
• Black (Pantone Black)
• Wall-mountable, indoor
• The server can be mounted upside down

Interoperability
• For information about supported Call Control / Unified Communications (UC) & UCaaS platforms, visit support.spectralink.com.