Spectralink 8002 phones TFTP Issues

Hello,

 

I have unsuccessfully tried to get our Polycom 8002 phones to fully boot using a HP E-MSM430 AP Units. 

I can see the units trying to download from the TFTP but will get an error when trying to download pd11wsd3.bin , pd11gl3.bin, & pd11wsd.bin. 

However, it will download slnk_cfg.cfg file properly.  The phones will never fully boot , and will will try and redownload the code over and over.

 

I have tried running both the solarwinds TFTP server, TFTPD32 , on two different servers.  I have tried recreating all of the config files from scratch and

I even went so far as to redownload and overwrite every single file on the tftp to try and get this working.

 

My config files are as below:

--sip_allusers.cfg--

 

PROXY1_ADDR     = 192.168.240.8:5060         # replace the ip address with the Asterisk Server's Address  
PROXY1_KEYPRESS_2833 = enable
PROXY1_KEYPRESS_INFO = disable
PROXY1_HOLD_IP0 = disable
PROXY1_PRACK = enable
PROXY1_REREG_SECS=3600
PROXY1_KEEPALIVE_SECS=14
#PROXY1_DOMAIN = 192.168.240.8       # Replace this with your SIP Domain's name
PROXY1_CALLID_PER_LINE = disable

 

slnk_cfg.cfg

 

[TYPE22]
pd11wsd.bin
pi110001.bin

 

sip_7518.cfg

 

LINE1         = 7518
LINE1_PROXY   = 1
LINE1_CALLID  = 5931   
LINE1_AUTH    = 7518; 123456

 

 

 

 

Any ideas?

 

Thank You,


Josh

Forums: